AISI grade steel bars are required for different industrial applications. China based Wuxi Xingsheng special steel Co.,Ltd specializes in AISI grade steel bars with high heat treatment capabilities, which are in demand in forging and other industries. The company has a huge production capacity and can supply steel bars throughout the year to meet the requirements of an industry. With great toughness and very high impact strength, the company’s round steel bars are suitable for a wide range of heavy duty applications.
According to the spokesperson, one can find the high quality AISI 4130 steel in their portfolio, which is a low alloy steel with 1% Cr and 0.6% Mo as its elements. The steel exhibits an excellent toughness, resistance against corrosion and machining ability. This type of steel can be welded very easily. Wuxi Xingsheng special steel Co.,Ltd supplies this steel in the hardened and tempered conditions with a hardness ranging between 207 and 235HB. The spokesperson states that the forging of AISI 4130 must be carried out at a temperature range of 950℃-1200℃. This type of steel gives a fine grain size, when the forging temperature is kept as low as possible. The steel should also be uniformly heated before forging for the best results.
The AISI 4140 steel is another notable product in the company’s portfolio, which has higher carbon content. The company can supply this type of steel in the round, block, square, flat, shaft and other dimensions. AISI 4140 has a good strength, is tough and has high resistance against impact and corrosion. The steel has good heat treatment ability, but an insignificant welding ability. The company can supply this steel variety in quenched and tempered conditions with hardness between 28 and 32HRC. The spokesperson reveals that for forging this type of steel, it should be heated uniformly and must be cooled down as slowly as possible. If it is cooled non-uniformly, then its structure can be refined using the normalizing process. After thoroughly heating the steel, it should be cooled in the still air for the best results.
The spokesperson also talks about the AISI 1045 steel, which is a medium carbon steel with 0.43%-0.5% Carbon content in it. This kind of steel has good machining ability and welding ability to be used in the industrial applications. However, this steel lacks of certain alloying components, and thus has low hardening ability. The company supplies this type of steel in black hot forged or normalized conditions, with a surface hardness of 170-210HB and the tensile strength ranging between 570 and 700 MPa. This type of steel can be used in the applications, such as axles, bolts, clamps, connecting rods, pins, rods, shafts and others.
About Wuxi Xingsheng special steel Co.,Ltd.
Wuxi Xingsheng special steel Co.,Ltd was established in 1998. The company focuses on forging for more than 20 years and only supplies steel products with high strength and great forging abilities. They have a wealth of experience and knowledge. Now for more than 20 years of development, the company has become one of the leading special steel manufacturers, suppliers and exporters.
Media ContactCompany Name: Wuxi Xingsheng Special Steel Co.,LtdContact Person: Tom ZhouEmail: Send EmailPhone: +86-15852726305Country: ChinaWebsite: http://www.round-bars.com/
